tag's latest activity

  • tag
    tag reacted to Fremont's post in the thread New Hack... with Like Like.
    I went to a 2:1 since I found my Sunfish more tiring in heavy wind than my Hobie! I have a Harken mini block shackled to a spring clip...
  • tag
    tag reacted to signal charlie's post in the thread 1964 ALCORT Sunfish ANNA with Like Like.
    After circling this Sunfish hull for several months, we've decided that the hull is beyond economic repair, when combined with the fact...
  • tag
    tag replied to the thread Phantom piece.
    If you add a horn cleat to the mast, then there will very little load on the tail of the halyard, and you could probably just bypass...
  • tag
    tag reacted to L&VW's post in the thread Phantom mast with Haha Haha.
    You might already have one: It's a Phantom mast. Feel around for it.
  • tag
    tag reacted to Mama H Chicago's post in the thread Sailfish Bow Handle Joy! with Like Like.
    After tearing apart many many boxes post moving twice in 6 months, I finally found RRD’s original bow handle. I’m not sure if it was...
  • tag
    tag reacted to baddoggoodlife's post in the thread The JMS project with Like Like.
    So what do you do when your project boat is almost done? Start building a fleet. Couldn’t help but pick up this kit super sailfish from...
  • tag
    tag replied to the thread Laser Bahia.
    Ken, if you trouble finding the Bahia, have you looked into an RS Quest? I think they are similar and the Quest might be easier to find.
  • tag
    tag replied to the thread The JMS project.
    The bolted on pulley could fail under heavy load - the integrated fairlead in the modern mast cap is less prone to failure and works...
  • tag
    tag reacted to Alan S. Glos's post in the thread F250 meets Sunfish rudder bracket with Like Like.
    Sun1fish's suggestion should work but be gentle as you don't want to crack the fiberglass surrounding the bracket. Removing the bracket...
  • tag
    tag reacted to Wavedancer's post in the thread F250 meets Sunfish rudder bracket with Haha Haha.
    Get a new boat (from the truck guy’s insurance)…
  • tag
    tag replied to the thread F250 meets Sunfish rudder bracket.
    Heating it up might help, but I'm not sure how easy it would be to heat it with it still attached. sun1fish's plan should work, maybe a...
  • tag
    tag reacted to sawyerspadre's post in the thread F250 meets Sunfish rudder bracket with Wow Wow.
    I just picked up a nice 2000 Vanguard and on the way home, a knucklehead bumped into the boat, pretty hard. His truck pushed the boat...
  • tag
    tag replied to the thread Smaller arm Harken swivel mainsheet cleat.
    Have you used that version but switched the fairlead out for a ratcheting block?
  • tag
    tag reacted to sadkins372's post in the thread Smaller arm Harken swivel mainsheet cleat with Like Like.
    I tried a Harken 205 on my Sunfish and did not care for it. It was clunky when I tacked and would sometimes not swivel around, causing...
  • tag
    tag reacted to Dale Tanski's post in the thread What trailer is this one? with Like Like.
    Can't you register it homemade?
Show older items

Back
Top